Solar street lights are mainly composed of solar cell components, controllers, batteries, and LED light sources. Light poles and structural parts, etc. Refer to the solar street light assembly drawing to assemble the solar street light.

1. Install the lamp arm. Use a thin iron wire to tie the exposed end of the sheath wire on the lower lamp pole tightly and wrap it with black tape; the other end of the thin iron wire goes through the lamp arm assembly; slowly pull the thin iron wire at the top of the lamp arm assembly to make the thin iron wire Drive the sheath wire through the lamp arm assembly, and at the same time the lamp arm assembly gradually approaches the lower lamp pole, until the panel on the lamp arm is aligned with the lamp arm boss on the lower lamp pole and is in close contact, and then use suitable bolts to fasten the lamp The arm assembly is on the lower light pole. When fixing the lamp arm assembly, avoid the sheath wire skin from being damaged or even cut due to the lamp arm assembly squeezing the sheath wire. Disconnect the thin wire from the sheathed wire.

2. Install lamps (with light sources inside). Check whether the specification, model and quantity of the light source meet the design requirements. Assemble, thread, and wire the light source lamp head and lampshade to ensure that the positive and negative electrodes are connected correctly. Verify whether there is any problem with the light source and its circuit. If there is a problem, find out the cause and solve it in time. Move the open lamp close to the upper end of the lamp arm and expose the sheath wire. Pass into the lamp from the rear of the lamp. Pull the sheath wire and insert the lamp into the lamp arm at the same time, the overlapping length of the two is 150mm. Stop the sheath wire on the wiring terminal inside the lamp, and make sure that the positive and negative poles are connected correctly when wiring. Verify whether there is a problem with the light source and its circuit. If there is a problem, find out the cause and solve it in time.