The solar street light system can guarantee normal operation in rainy weather for more than 15 days! Its system consists of LED light source (including drive), solar panel, battery (including battery incubator), solar street light controller, and street light pole (including foundation) And accessories wire and other parts. Solar street light manufacturers tell us about the wiring method of solar street lights. The following are the main methods.

1. After the battery is connected, the indicator light of the controller is in the state of running water. (The positive and negative poles are reversed, the controller does not work)

2. After connecting the load, press the "Adjust" button three times in succession to adjust the time and the load will light up. (The load cannot be short-circuited, otherwise the controller will be damaged)

3. The load is not bright, please check the load, or measure the battery voltage

About the wiring method of solar street lights

4. After the photocell is connected, the load is off, indicating that the light control is normal. Otherwise, please check the photocell.

Among the many street lights, many cities will choose to buy solar street lights, because the quality of these street lights is relatively good. And it has good energy saving and environmental protection ability. Of course, when assembling street lamps, it is very important to understand the corresponding precautions.

We should all know that many local street lights used to use electric lighting. For example, when there was a sudden power outage at night, the streets were completely dark, and it was very inconvenient to do anything, and people who were afraid of the dark would not dare Walk at night. But now there is no such trouble, because many street lights in local streets have all been replaced by solar street lights. This kind of light is illuminated by the principle of solar energy. It absorbs solar light during the day and can convert the city's electrical energy. There is also a storage battery inside for charging, providing electricity to the LED light source for night lighting.

The above is an introduction to the wiring method of solar street lights. Of course, this is only part of the method. We can also use other methods, but no matter what method is used, we must pay attention to personal safety.