Solar controllers are mainly used in solar power supply systems such as homes, commercial areas, factories, transportation, pastoral areas, and communications. Suitable for all kinds of DC light sources, large quantities of matching light sources include 12V and 24V (0-10A) LEDs, electrodeless lamps, energy-saving lamps, high-pressure sodium lamps, ordinary light bulbs, etc. According to the special design of solar lighting products. There are one-way load and two-way load products, there are two sets of 12V and 24V systems.

At night, the solar street light controller light-controlled intelligently automatically turns on the lighted load, and adopts the full-voltage turn-on method. For energy-saving lamps and high-pressure sodium lamps, the load can be lighted at one time, avoiding the need to start the load multiple times and prolonging the life of the light source.

Avoid over-discharge recovery, as long as there is an over-discharge, the controller will lock, automatically cut off the load, completely protect the battery, and then avoid the load from flashing back and forth and damage the light source.

The charging method adopts the high-efficiency PWM charging method, which increases the power consumption time; the normal direct charging, multiple floating charging, constant voltage and small current trickle charging automatic control methods make the system have a longer service life; improve the use efficiency of the system. When the battery reaches the overcharge voltage, the charging circuit is disconnected.

It has automatic control such as overcharge, overdischarge, reverse battery polarity protection, battery open circuit protection, solar battery reverse polarity protection, and anti-reverse charging.

There is an intuitive LED light-emitting tube inside, which reflects the current working status of the system and allows users to understand the usage status.

Using advanced non-contact control, it can be used normally in cold, humid and high temperature environments, and can adapt to outdoor places with harsh environments.

It has a light-controlled intelligent turn-on mode (when the solar cell voltage is less than 5V in the dark, the load is automatically turned on, and the load is automatically cut off when the battery voltage is higher than 6.5V in the daytime). The system has the following two working modes, arbitrary settings, light control Start + over-discharge protection shutdown + timing delay shutdown mode, the timing delay shutdown time can be set arbitrarily (2h 4h 6h 8h, etc.).

The solar street light controller can make the entire solar photovoltaic system operate efficiently and safely. It coordinates the work of solar panels, batteries and loads, and is a very important component in the photovoltaic system.

Solar street light intelligent controller is mainly used in solar street lights, LED solar lights, solar garden lights, solar power generation systems, etc.!