The installation of solar street lights is relatively simple, and it is enough to assemble each component separately and directly install it on the tree light. Let the street light manufacturers introduce to us.

There are 5 large solar street lights. From top to bottom, the first is the solar panel, the second is the lamp holder, the third is the light pole, the fourth is the controller, and the fifth is the battery. The same is true for lithium batteries. The lithium battery solar street light is to install the battery and the battery panel on the street light bracket.

To install a street light, you first need to assemble the battery board bracket, fix the battery board on the bracket, and connect the wires according to the height of the light pole. That's it, then install the assembled bracket on the light pole and fix it, connect the wire head to the inspection port (the fixed direction is that the light pole is erected due south), then install the light head on the light pole bracket, the light wire is also extended . At the inspection port, we place the battery in the battery well and extend it to the ground through the conduit. For the first installation, it is recommended to test the lamp first, first connect the positive and negative poles of the lamp head to the corresponding positive and negative poles of the controller, then connect the battery, and then connect the battery board. During the day, the lights are turned on and off. If there is no problem, then the tree light, fix the orientation, fix the base, then connect the controller wire and bury the battery.

All is well, just install a solar street light. By analogy, 4 people can install 30 to 40 sets of street lights a day.